AISINTKF-006 Engine Timing Belt Kit with Water Pump - Compatible with Select Subaru Forester, Impreza, Legacy, Outback

High quality, lower priced timing belt kit with all top notch OEM brands for everything save perhaps the tensioner, as no "Japan" casting is to be seen. (But tensioner beautiful / flawless! Would Highly recommend tensioner priming / testing procedure as outlined in the very clearly written provided instruction pamphlet. These things have a sealed oil system that will redistribute during shipping as they are usually laying for quite some time on their side or upside down, 'Japan' or not! If nervous about it, practice on your old tensioner first!!) I must admit I skipped replacing the water pump as my original was still fine, but the one supplied in the kit looks spot on identical to what is in there, and is supplied with the proper metal gasket and odd black rubber stops needed around some edges. Then there is the belt quality. Stellar, as far as I can discern. Mitsuboshi is the OEM for Subaru labeled belts, and was spot on in thickness and conveniently marked for setup. As my original belt was still near perfect at 136k miles, I wanted to stick with Mitsuboshi!!

2011 Subaru Outback 2.5 102,000 miles.Recently handed this car off to our college-bound son. Had the brakes done, new tires, oil changed, wheel alignment.All done at local shops. Looked at the recommended service items, of which one was timing belt replacement. Called a few local shops, and the figures they were quoting were ridiculous. I had one say $2500!!!Did some online sleuthing, and discovered that the timing belt change (plus water pump) seemed to not be out of my capabilities.I have a decent collection of tools, and decided to go for it myself. A decent torque wrench and metric socket set is essential. There is a YouTube channel called MrSubaru, and this guy gives pretty clear instruction on how to do this.This Aisin kit is pretty much what is recommended for Subarus. The parts are Japan quality.Took me a number of hours to do this, but if I had to do it again I think I could probably do it in an hour, maybe 2.Car runs great, and should be set for another 100,000 miles.I also replaced the serpentine belt while doing this, as it needs to be removed anyway during the procedure.You’ll also need to get the Subaru coolant if you replace the water pump (why not, it’s in the kit!). I bought 2 gallons here on Amazon.Good luck.

Bought this kit for my 2009 Forester and provided it to my technician to install. Picked up a Subaru OEM thermostat here on Amazon, too. All went perfectly and he was impressed by the quality of the kit. This is the way to go!

So you might have heard that some of the older Gates kits had Chinese bearings. This doesn't. Now oem has a crush gasket for the water pump. Some kits don't have it and require messy glue. This kit has the crush washer. I also replaced the timing belt cover hardware with the kit made for wrx. That worked great. Also got the company 23 tools for the job, as the cam pulley was damaged by previous owner. So this all worked out. Oh I also was missing the oem belt guide for the crank. So I bought an aftermarket one for the wrx. That works perfectly.

good fit thanks

Aisin are the best parts available for 2012 Subaru Outback timing belt diy. Tools required for the job include:Metric socket set(deep is good)22mm (crank bolt) socketMetric set of box wrenchescrank bolt wrench (avail on amazon for $21)Big drain pan for coolant drainSpill proof funnel to add coolant (Amazon $20)UPDATE: Milwaukee cordless ratchet help immensely on install in my 2nd Subaru, adding to must have tools list.Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger (Battery Not Included, Power Tool Only) $98 -Hone depot sells the m12 1/2” drill with same batt for $99.Optional tools (not req’d but good to have)Wrench to remove coolant tube clampsCordless ratchet wrenchService is due at 105k mi and should not be neglected, timing belt failure is the easiest way to ruin an engine.The timing belt service is good time to complete several other maintenance tasks, the parts required include:Aisin timing belt packageSubaru brand thermostat (cheaper at dealer)2 jugs of coolant (cheaper to buy at local dealer)Spark plugs (bought at dealer)Snake belt( (Amazon)Air filter (Amazon)Cabin filter (Amazon)Pour Pepsi on battery if corrosion is presentRecommend you watch youtuber MrSubaru (guy with long beard) his videos are fantastic. His videos Made the job much easier as he provides the proper torque for all bolts. Personal recommend using torque wrench as the bolt tightness was never as I expected and would have been wrong if done by hand. Instructions included with the belt were not the best and actually created confusion on more than one occasion.Job took me 7 hours to complete with slightly better than avg mech skills and no real trouble. Could be done faster but took my time #dadjokeUPDATE: Just installed a second TFK-006 timing belt on my 2010 Forester 2.5 non-turbo and the parts have the same top quality. True 5 star product.

In researching timing belt and water pump kit for the 2.5 L Subaru motor, this brand came with the highest recommendations from mechanics. Do not go with anything other than this brand or the Subaru OEM. The quality is here. Just a quick note, I checked the price for the Aisin kit from our local parts store and it was almost twice as expensive.

Great, high quality pieces, easy to follow instructions