Suptek Monitor Mount Gas Spring Monitor Arm Desk Mount Fully Adjustable Fits 17 20 22 23 24 26 32 inch Monitors Weight Capacity up to 22 lbs

Once you set it up and adjust it, it is super. I would recommend having a friend handy to help as it can get awkward handling a bigger display (mine 32" curved.) Once setup it moves everywhere on my desk. It took me a good 45 minutes to setup, but I am very slow and careful. half the time was getting the monitor screwed to the mounting plate.Really sturdy built. Heavy!This is not stupid easy to set up, my monitor did not like either of the two length screws provided, but that is monitor specific. Two of the threaded inserts in the back of my monitor were recessed just enough so the short one didn't bite enough and the long one bottomed out way too early. I had some spacers to make it work.With mine, I had to definitely had to tweak the joint tightness and spring tensions. Also I wound up offsetting the mounting point on my desk from center to get the best range of position for my application.I love it because it actually fees up desk space when I am sim racing.

I Purchased this Suptek desk mount articulating gas spring monitor arm to use in conjunction with a Suptek laptop mount. This desk mount arm can be attached to the edge of your desk or through the grommet hole. It is a very strong metal item which should do its job for years. I added the Suptek 13-18" expanding adjustable laptop mount which fits this arm perfectly and provides sturdy support while opening up valuable desk top space. If you need to get your laptop out of the way or mount your monitor to an adjustable base you can't go wrong buying the arm or the arm and laptop mount together.Highly recommended by me.

If I were to purchase this particular item again I may spend the extra 15 $20 for a little bit better quality. Everything is fine with it, although I do struggle to keep the monitor in a middle type position it holds well when it's all the way down or all the way up but in the middle I did have to play with the adjuster. The color and quality are good. One thing that I lucked out on was that the desk I installed it on had no brackets underneath where I placed this item. After installing I thought about moving one of the mounts to another edge of the desk, only to realize that I wouldn't be able to do that because of a mounting bracket along the edge of the desk. This is not the fault of the screen mount, but it could be an issue if you aren't aware that you need a flat surface of at least 3 in Long by 2 in wide on both top and bottom of the desk, in other words it needs to sit flush. Also the screws that came with it I was not able to use because the screen that I got required a 10 mm versus the 11 mm that was supplied so I did have to run to the hardware store and pick up the right item so I didn't screw into the back of the screen while mounting the plate. That being said the screws they offer are probably 95% the standard. There is a way to do cable management following the Mount, although the way I have it set up, the cords were not long enough to follow the mount and then also get to my device so I am not using the cable mounts. But they are offered. It does not take up too much desk space which is nice. Would I buy again, as I said before I might go for something a little bit better, but I would recommend this item, as long as people understood what they were getting. Shipping and packaging were excellent.

I never used one of these before but needed an adjustable stand to fit my 24 inch monitor between two shelves because the included one made it too high. The build quality is immediately apparent...it feels heavy and substantial. The arm tension is rather tight but the hold is rock steady and since I don't intend to move it around much, there was no need to adjust the gas piston. It comes with all the mounting screws and hardware and is easy to set up once you determine where you want to clamp it onto the desk. Very versatile positioning options, saves a ton of desk space and feels super secure. I may never use a standard stand again.

Very easy to assemble and adjust. Just make sure that the threaded holes on the monitor match the mounting bracket. I didn't think to check it so I had to drill new holes. Despite that, it functions great, swiveling 360 degrees on the arm and the bracket.

Great monitor arm for the price honestly. It was extremely easy to install. It's very stable for a cheap arm. honestly probably one of the better cheap arms I've had definitely will be purchasing another one to replace the arm that is on my main monitor. the cable management feature all be it a bit basic is extremely convenient and way better than some of the other options I've had.

Las partes de plástico no están pintadas igual que las partes de metal

This product was a lifesaver. It helped me to declutter my desk from a bulky monitor stand. It is holding the monitor in the far right very well. It's versatility makes it a great option! It is pretty compact and offers a wide range of height adjustment, all while looking great! It was also very easy to install! I recommend this product highly especially at its affordable price.