MP-MALL 3-Pack Screen Protector Compatible for Google Pixel 4a 5.8-inch, Not Fit for Pixel 4a 5G, Tempered Glass, Alignment Frame Installation, 9H Hardness

I recently bought a pixel 4a, and tried a different brand of screen protector at first, and found it to be trash. Bought this brand as a second attempt and it is much better.The Good.- Easy install. The frame seems to line the protector up just fine, with no difficulty.- The fit. I had a few bubbles that were hard to get out, but eventually I was able to work them out. It covers the entire screen, but doesn't go all the way to the edge so it is case friendly. The edge of the protector also tapers a bit, so it isn't as sharp as the other brand I tried. It does have a hole for the camera, which I am not sure matters much or not, as my previous protector covered it and took selfies just fine. I also don't see any rainbowing along the edges when the screen is on.- Touch commands work fine through it, no problem there at all so far.The bad- The edges do seem to have a little bit of adhesive which catch hair/dust/lint in the pocket. It isn't difficult to clean up, but it would be nice if this wasn't there.- It is a very glossy screen protector. It seems quite a bit shinier than my previous one, and the bare screen. Not a huge deal, but it might be annoying for some.The Ugly- This thing's oleophobic coating doesn't seem to do much to prevent smudges or fingerprints. It seems to be quite the fingerprint magnet. Not a big deal in low light conditions, but its pretty apparent in daylight.TL;DR:For the price, this is adequate and I don't feel like I wasted my money. It isn't perfect, but the flaws are fine considering how cheap it is.

I just got a Pixel 4a, and once I had it orders, knew I wanted glass screen protection and a good case. I selected these screen protectors after doing my search.As others have said, these come with pretty much everything you need to correctly install the protector: A frame to position the protectors, wet cleaning wipes, dry cloth, stickers to pick up dust. The only thing they don't have is a dust-free room.One trick: Wipe and dry the positioning frame after you clean the screen and before placing it on the phone.Four stars because the install left many little bubbles and I had to really work at them to get them out, using the squeegee. As with other screen protectors, I have found that doing the install, getting as many bubbles as you can out, then waiting a few hours and going after the remainder is easier and less frustrating.Best part is I have two more protectors in case this one gets damaged. Just have to remember where I store them.

I love that alignment frame! I made positioning the protector SO easy and quick. No matter how careful I tried to be, I still had problems with dust. Fortunately, there are 3 shields in the pack and I had to use 2 to get it right. They provided a sticky piece of paper to use as a tack rag to pick up lint. I recommend you also check the sticky side of the shield for lint. Don't use the sticky paper everywhere on the adhesive side of the shield -- just look for lint in a strong light before dropping the shield into the alignment frame. You can use the sticky paper on the adhesive side of the shield without hurting it -- just don't press hard when you are trying to remove lint from that side.

I have had many phones and added the screen protectors. Did I need to? Not sure but my phones always looked brand new. This product worked just like the others. It fit the Pixel 4a screen almost invisibly. I did have a few (3) bubbles that didn't come out but probably some of my fault as I didn't use the dust adhesive since I didn't see any specs. Might have been some there. Screen very smooth and does not interfere with operation. I expect that this glass will look like the others in use--pristine after many months of use.I will say if you are looking for screen protector I recommend glass over other materials. It is very hard.

The packaging was robust and solid and all the necessary parts were present.The included plastic mounting gizmo is a bad joke and never should have been included. I wasted one protector trying to use it, and ended up using the included rectangular stickers to hold the protector from the top and bottom while I manually positioned it, as I have done many, many times before.I do not understand the point of the cutout for the front camera. My Pixel2 screen protector had no such cutout and performed just fine, photographically, for a front camera. This protector cutout now acts as a dust reservoir.Biggest complaint, by far, is that these are not 100% glass. They are like 70% some plastic film and 30% some glass backing. You can bend the living daylight about of these and they won't shatter until you really, and I mean REALLY tweak them.For the price... Whatever. They will serve the immediate purpose while I find something of higher quality.

I am super impressed with this screen protector! The included frame made the installation the easiest I have ever done. Installation really was as simple as the video shows.The end result is flawless. Perfectly centered screen protector. I have absolutely no bubbles. The screen is clear and bright. The touch responsiveness is unaffected by the screen protector. I also really like the hole for the camera, which not all products have.I installed this screen protector on my Google Pixel 4a and its perfect. I would highly recommend this product.

For installation, I followed all the steps but somehow still got bubbles on my first try. I had to dump that one and try again with a second shield. I got this one on well, no bubbles. However, now that I've been using it, residue builds up around the interior rim of the selfie camera punch. So far I haven't noticed it affect pictures but it is very difficult to clean without a cotton swab

I took the time to do it exactly as they say in the video. Look really closely for any specs of dust. Make sure you clean the aligner so that it doesn't put dust on the screen, and then do an extra go around with the sticker to pick up any dust once the aligner is on. Once there's no dust you can't really screw it up. You just slot the screen protector in, let it fall flat, and push out the air. Perfectly application first try for me.If you found this helpful feel free to press the button.

After doing research from all over the web. I decided to give this product a try. All I can say is this is a awesome product. I received my package and noticed that I was missing one screensaver. I reached out to customer service, which was exceptional I might add. Got a replacement in the mail within a week.Experiencing zero issues with the screensaver itself. Gesturing touching the screen no issues at all. The only bit of advice I would give to people when putting on the screensave is to watch the video several times before attempting to install the screensaver. One more note make sure no one's going to bother you, while you are attempting to put the screensaver on.

The install guide caught my eye on this screen protector, so I tried it. Worked out well, aligns the installation nearly spot on! The next day, I notices it was a biiiiiiiiiit off, just a "smidgen". But no fear, I was able to press and nudge the protector over just the bit it needed to clear the front facing camera. After installation, I saw some bubbling underneath, little little ones. Not the big ones you can easily rub out, those I did. Don't panic, the little ones will disappear over night. Be patient, don't panic, leave it be over night. My suggestion, install at night, put the phone away to charge over night so you're not tempted nor bothered by the temporary imperfection. It'll work itself rightly over night.

I bought one MP-Mall product for myself (S20 Ultra) and I liked my experience so much, I bought one for my father (Pixel 4a).I usually always end-up getting bubbles under my screen protectors since installation isn't easy. They provide all the needed tools (physical and instructional videos) to do it perfectly.Got it the first time with the S20 Ultra cover and took me 2 attemps with the Pixel (while they include 3 kits in it).

My parents and I got the same phone and I applied all the screen protectors. Good instructions and excellent supplies. I got a speck of dust under one and had to lift and clean it. This left a bubble but was gone by the next day. One screen protector went on cleanly and the last one had two small bubbles which disappeared overnight. I haven't dropped my phone face down yet, so I can't speak to the durability. Touch sensitivity is good. Overall I'm happy with this product!Update: I dropped my phone and broke the glass protector. Glass shattered horizontally but the screen underneath is pristine!I've also installed a different brand on two tablets and another phone. The prep supplies for this brand are superior. They get the face much cleaner in preparation for the glass protector.