E Gate K9 Pro-Max 6X Automatic Projector with 24watt Sound bar (C222-3600 mAh Battery) | 600 ISO Lumens & 1200fc | Full HD 1080p Native | Auto (Focus + Keystone) | Android 9 | HDMI, USB, WiFi & BT

Writing after using for more than 2 months'. The projector is actually good and among those few that actually work in dim light conditions as well. This is an indoor projector, doesn't emit heat and has decent sound. It's better to connect it to external speakers for quality sound however the inbuilt speakers are decent enough to watch movies on low sound. Don't expect home theatre sound.Coming to video, if the room is dark, the video quality and brightness is exceptionally good. However if there is a tubelight (switched on) then it becomes a problem and the visuals get too dim. That being said it is good enough to watch with open windows and doors and some ambient light.

This review is for the native FHD projector.Yes, it is a native 1080p led projector. connected this to my desktop computer and tested also.Dont bother trying to play videos from USB. Quality is bad.But when connected to right streaming or display source thru hdmi, it is actually quite good. I mean picture quality, colours, brightness etc for a sub 10k projector. In this department this projector can easily compete with many projectors in sub 15k ranges.Sound is also pretty much okay, loud enough more like boat 5w speakers, may be a bit more louder not good quality wise. Quitr workable as portable solution, but not for a permanent setup.Audio output to my studio headphones are pretty decent quality wise and loud also. Meaning 2.1 speakers can be connected to it, for a higher setup, person has to figure out to seperate the audio at the source itself.From 9ft and 3-4 inches distance of lens to wall, we can get exactly 100 inch(87 inch x 49 inch) projection. So, it can be called as short throw projector, albiet may be border level. There is an option to reduce the screen size upto 75% of original size electronically once connected to HDMI.Keystone correction is not usuable at all. That wheel has to be exatly in middle position to get a good focus on whole screen.That means one has to setup the projector or screen at a fixed location. Can not lilt the projector to move screen up or down and then adjust with keystone correction. I. e if you want to keep the projector screen at lower levels, projector also has to fixed at lower levels only. Best focus can be get, when projecting exactly oppsite to the projector probably 5 to 6 inch above, so if we flip the projector upside down, we get best focus opposite to center a few inches down.For mysetup, where projecting only 1.5 feet above from the floor, going to use a wall mount to setup the projector upside down, this way i can fix the projector a bit more above/behind the sofa. I will post the pics later, once it is setup properly.Now the verdict - this projector with a combination of reflective projector screen( look it up on amazon xelectron or minago brand) is one of most vfm combo for approx 11k for experiencing a very bright 100 inch screen experience of good quality for 1 or 2 person. But now that im considering buying one of those expensive fixed frame alr projector screens costing upward of 15k to 30k, im thinikg it would have been better if i could have invested a bit more on a brighter projector(look only ANSI value). This buy was more of an impulse purchase, but it is more then good enough for me now to make me consider much costlier projector screens and then later upgrade to a high end projector.Edit: the biggest drawback of this projector is that dust gets inside on lcd panel, which impacts the clarity also after a few days. I had to clean the panel myselg just after 1.5 month. New lesson learnt, apart from high ansi lumen projector, this is also an important factor for future purchase. Planning to get a custom cloth cover made, so that i dont have to clean it often. Though, Lcd cleaning can be done pretty easily without much opening and its easier compared to youtube videos i have seen for previous model. Somehow lens did not get any dust inside yet. Only the lcd has very very fine dust particles inside.

I am a regular user of egate projector since 2022. I bought Pro K9 max model at Rs 18990 back then. As there weren't some better options on Amazon.I was quite happy as egate didn't over promised with this one and it delivered some good picture quality with mediocre android firmware.My assurance was 50000 hours of lense life, but recently that has proven wrong too. The design isn't dust resistant and lense shows patches of burn marks way early in its life cycle.One more setback is thier support. I sent the item for servicing with clear mention of dust removal and lense related issue. They took more than 20 days with no information or updates and charged Rs 5000 without bill to ship back after a week of follow ups. It makes sense how they offer only one year warranty now.I just received it today with broken power LED panel, as the light doesn't show up. Hopefully, the projector shall function properly.The support may be skilled and equipped, but too bad at informing customers about their products. Behaving almost like they handle some kitchen repair item instead of such delicate optical instruments.

Its been 1.5 year's , this product is awesome,1080p clarity, bluetooth,n many features, its worth every penny, this company is also good when i had dust problem in projector they picked up from my home and they gave it back in 1 week time and its all free....Generally all projector have dust issue u can't do anything about it...

I am writing this review after 6 months of usage, we have purchased 4 egate projectors due to their brand and trust, this projector is good in performance but got focus problem after 5 months of usage. we have to send the projector to their service center in Noida only, they don't have any service center in India other than that place. But their service center staff is very prompt and helpful to understand and coordinate. They have fixed the issue and sent back through courier service,now the projector is back and working fine. I found slightly fitting issues I.e the board inside the projector is loose fit and the output connection jacks are slightly displaced .