For Toyota FJ Cruiser 2007-2021 car center console side outlet storage bag trunk storage box (Trunk Storage Box Type B)

Fits perfectly! More storage for miscellaneous items! Seems like good quality as well.

The basket has been cut with a laser cutter leaving many sharp edges that cut my old skin. After drawing blood several times I decided I needed to sand all the sharp edges and all the cutouts and repaint. Allow one hour plus to complete. Should be tumbled to debar before powder coating. Several of the screw threads are not formed and you will need to go to the hardware store and buy some 4mm nuts to fix this problem. You need to reuse the factory tie downs to clean up the install. The spacers supplied are too long. the rear one needs cutting 1/2" and the front one needs to be cut 3/4" Needs some rubber under it to stop the rattleing and a mat inside to also stop the rattles. Needs a 90 degree turn in on the top outer side to stop it bending out when you fill it up. Im thinking of getting a 1/2 x 1/2 alloy angle screwing it on to fix this. Too much money for a half finished product. Installed on a 2007 FJ

The rear tool bin was easy to assemble and fit exactly to the bolts in the FJ. There was even a holder for the two plugs that had to be removed. Thank you for a great product.

Look, once you assemble it and mount it on, it’s great for storage and makes my FJ much less disorganized. It’s getting past the assembly part you’ll have issues with. Screw holes on each panel don’t quite line up with each other, and the included screws had a real hard time getting their initial bite before screwing all the way in. Took me over an hour and a half just to get it assembled, due to me having to fight past those two issues. That said, mounting was much easier than the assembly. There was no included instructions either, but I was able to piece together the steps based on pictures from the listing. That said, if you need a storage option for your FJ, this is a good product to get, but just be aware that the assembly will be frustrating to deal with.

It is thin gauge still and takes some work to put together. Does hold up great. Would buy again

Keeps all my crap stored out of da way. Sturdy, looks great

I really wanted this because, unlike other molle storage baskets, it fills in the entire space in the rear driver side of my FJ Cruiser. Looks like a custom fit unit. However, the engineering was poor as was quality control. Very small screws are provided to assemble the pieces, and the screw holes were either clogged with paint, or were completely stripped out. Had the flange overlaps been wider, I could have drilled it out and used bolts instead, but with very tiny overlaps, that was impossible. There was insufficient space to install bolts. Sadly, I was forced to return the item.

It does what it says but assembly is poor. Clearly the manufacturer never does any test assembly. If they did they would find that the holes are miss aligned. This makes assembly more difficult then it should be.. the results of this mean the screws used for assembly don’t properly seat and this causes the screws to strip or the threads on the piece it screws into strip.