Baomain Universal Rotary Changeover Cam Switch SZW26-63/D303.3D 660V 63A 3 Position 3 Phase with Master Switch Exterior Box LW28-63/4
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8

Baomain Universal Rotary Changeover Cam Switch SZW26-63/D303.3D 660V 63A 3 Position 3 Phase with Master Switch Exterior Box LW28-63/4

4.4/5
Product ID: 82561784
Secure Transaction

Details

  • Operation Mode
    ON-OFF-ON
  • Current Rating
    63 Amps
  • Operating Voltage
    660 Volts
  • Contact Type
    3p No
  • Connector Type
    Screw
  • Brand
    Baomain
3 Pole
🔌660V
⚖️757g

Description

🔄 Switch Up Your Game with Baomain!

  • ROBUST BUILD - Durable construction for long-lasting use.
  • COMPACT DESIGN - Fits seamlessly into any setup.
  • VERSATILE POSITIONS - 3 distinct positions for ultimate control.
  • LIGHTWEIGHT CHAMPION - Weighs only 757g for easy installation.
  • POWERFUL PERFORMANCE - Harness 660V with ease!

The Baomain Universal Rotary Changeover Cam Switch SZW26-63/D303.3D is a high-performance electrical switch designed for 3-phase systems. With a voltage rating of 660V and a current capacity of 63A, it features three operational positions and a compact size of 110 x 109 x 195mm, making it an ideal choice for both professional and industrial applications.

Large manufacture image 1Large manufacture image 2
Small manufacture image 1Small manufacture image 2Small manufacture image 3Small manufacture image 4Small manufacture image 5Small manufacture image 6

Have a Question? See What Others Asked

Does anybody know what the four rubber cone-shaped things that came with the box are for?
What size are the terminal screws? I want to use ring terminals on 6ga wire.
Is the amperage rating (RLA) 63 amps?
Can i run single phase in for feed and two out feed lines with this ?

Reviews

4.4

All from verified purchases

B**N

Great

Very durable

J**N

Works

Used in an RV Solar setup, two inputs to ( shore and inverter) one output. No instructions, but I used jumper wires on one side (output), putting the shore and inverter input wires on the other, top and bottom respectively. So far the setup works for my needs.

T**R

Works great, but the box is small.

Works great for our electric car charger. Our circuit breaker did not have enough amperage. So I made it to where you can either run the dryer or charge the car. If I had to do it again I would get one with a bigger box, because it was a pain to close with the wires.

C**S

Super great switch ! 😊

The media could not be loaded. Used switch to power between car charger and heater. Used a bigger junction box, but switch functionality was super and worked as intended. 👍🏻

H**A

Amazon, if the shipping box flap is loose, please tape it!

Arrived in one piece. Smartly, though, screws, caps, mounting bracket are kept all together in the plastic case. While the function is self-explanatory - who needs a instruction sheet - it would be reassuring to have one. Looking forward to using this three position switch! For your next customer, Amazon, if you see a loose flap, tape it!Now installed. Used for EV level 2 charging for choice of two sources of power. Works like a charm!

D**I

The housing is too small for the size of conductors it's rated for

I used the 40A with no issues. The 63A housing is way too small. Any suggestions for alternative housing?

S**T

Solid. Very useful.

This is useful for switching between inputs, outputs, single or split phase, depending on how you choose to wire it. The terminal screws are pretty heavy duty, no issues with connections. Mounts easy, holes for wires already there and the grommets included.

B**Z

Some things to be Aware of

This is a good deal for what it is. There are a few finer points to be aware of.1) Multiple selector switches can be expensive. Relatively speaking this switch and enclosure is a real deal.2) For the electricians among us note the contacts are not "arc or flash" proof. There is a warning to not switch under load.3) My loads are 30A, #10 stranded wire. The terminal pinch plates are arched and barely compressed the #10 copper. It was necessary to position the wire "just so" in order to make solid AND secure connections. Novices can easily experience heat damaged terminals (over time) and wires that spring free if they do not pay attention.4) The enclosure is quite deep, providing decent wire bending space but two things.a) the knockouts are not positioned properly so you'll have to drill your own...not a big deal.b) with four anchors in the back the box is "twisty" when the switch is turned...again, not a big deal.Now sure if I would purchase one of these for a professional installation unless flashing or arching was not an issue and, at that, I would use a standard nema box rather than the provided Euro/Asian sized box...the switch and cam can be easily adapt to a standard nema box.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
KD 17.10

Duties & taxes incl.

KUWAITstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Baomain Universal Rotary Changeover Cam Switch Szw26 63 D303 3d | Desertcart KUWAIT